Assembly help 2.0 for clockwork

With this assembly tool, assembly of the clockwork is easy and, above all, without scratches or damage to the clock or clockwork. This often happens when using wrenches or pliers.

That doesn't have to be the case anymore.

The tool consists of two parts. The first part is the large, thin stencil material with two suitable holding options. This is placed on the clockwork with the insert disc. The hole is large enough so that the insert disc does not hold the material after installation. It serves as the perfect "scratch protection". Then comes the acrylic bridge for the mother. In the first few uses it can be a little more difficult to "clamp" the nut. The reason for this is that it is easier to assemble the nut and it does not take time for it to fall out of the assembly aid.

Then screw the nut tight and the clockwork is assembled.

Dimensions:

Hole transparent thin stencils: 16mm

Thin stencil 76mm wide, 55mm high

Hole for Nut: 10.5mm x 11.5mm

Screwing aid 27.5mm wide, 50mm high

Be careful not to screw the nut too tight but also not too loosely. If it is too tight, it can affect the function of the clockwork. If it is too loose, the movement in the watch can slip and the time will no longer match.

So what are you waiting for? Let's get started with your self-created work of art, simple and easy with our tools. Please also take a look at our other assembly help, this is indispensable when assembling the numbers ❤️

"Product comes with protective film"